Skip to main content

Forumdervis W.

Beta
-

ForumDervis - Genel Forum Sitesi'a hoş geldiniz!

Merhaba, Ziyaretçi! Ben Mini; size yardımcı olabilmek için buradayım. İçerik sağlayıcı paylaşım sitemize eriştiğiniz için çok mutluyuz. Giriş yaparak, birbirinden güzel içeriklerimizden kolaylıkla faydalanabilirsiniz. Kayıtlı değilseniz, hemen ücretsiz ve kolay bir şekilde kayıt olabilirsiniz. Sizi de ailemize bekliyoruz.

(Giriş yapmamış kullanıcılar tarafından görüntülenir.)

Özel mesaj engelinizi kaldırmak için tıklayın ;

Extrusion Laminating Machine factory

29-01-2021, Saat: 04:44 AM
#1
Çevrimdışı
Extruder Lamination Machine
Machine Brief Description
Extruder lamination machine G2 type machine, also known as the second generation machine on the market. Mainly using LDPE, LLDPE, PP, PLA and other coating-grade laminating resins as raw materials,for producing PE coated Paper Cup Paper, Paper Bowl Paper, Instant Noddle Bowl Paper etc, The machine speed can reach 210 m/min, and the actual film production line speed is 180 m/min, with automatic tension control as well as automatic correction functions, fast speed and high efficiency with minimum wastage than G1 models.
ModelJDLM1300/100JDLM1600/105
Screw dia蠁100 mm蠁105 mm
L/D33:133:1
Finished film600-1200mm800-1500mm
thickness of coating film0.01-0.10 mm0.01-0.10 mm
Mechanical Coating Speed210 m/min210 m/min
Max extrusion capacity300kg/h330kg/h
Main motor power45 kw55 kw
Total power135kw165kw
Dia of main unwinding鈮は?300 mm鈮は?300 mm
Dia of winding鈮は?300 mm鈮は?300 mm
weight11000kg13000kg
Size10000脳9000脳3200 mm96000脳12000脳3200 mm
Power supply380V/3P/4L/50Hz380V/3P/4L/50Hz
Highlight
鈼廇utomatic adaptation of coating thickness
The PLC system can automatically calculate the coating thickness required by different equipment and different materials. Moreover, no matter how the equipment speed rises and falls during winding and unwinding, the PLC system can make the thickness of the coating always consistent.
鈼廇utomatic tension control
The PLC system realizes constant control of tension through a closed-loop control mode.
鈼廇utomatic correction
After the main unwinding, it must go through an automatic correction device to ensure the neatness of the winding. The choice of correction device, such as photoelectric correction, infrared correction, etc., needs to be determined according to the different substrates.
The raw material of plastic pellets is heated, plasticized and extruded by the extruder. Pressurized and plasticized by static mixer, extruded by T-die head, internal plugging die head adjusts the coating width without stopping the machine, and does not change the uniformity of the discharge thickness
The main feeder feeds, corona, enters the laminating machine, laminating and cooling.
The winding machine is equipped with automatic tension control, and the pressure is controlled by precision pressure regulating valves at both ends of the air expansion shaft to ensure stable winding. Under normal circumstances, the winder changes the rolls at the same time after the material is changed to ensure that one joint has one roll of film.Extrusion Laminating Machine factory
website:http://www.jd-extruder.com/laminating-extrusion-machine/
osbolivi

Hızlı Menü:

Konuyu Okuyanlar: 1 Ziyaretçi
970x91
buca escort cialis fiyat viagra fiyatı

Forumdervis

Türkiyenin en güncel forum sitesi

Task